Body-Solid Pro ClubLine SRK200 3-Tier Kettlebell Rack
The SRK200 is Body-Solid's Pro ClubLine kettlebell rack. Three tiers, each 62 in. by 13 in., in a frame measuring 24 in. deep, 71 in. wide and 34 in. tall. It weighs 161 lb.
161 lb. of empty rack is the number that tells you what this is. A rack that weighs that much before you load it does not walk, tip or flex when someone yanks a 50 lb. bell off the top tier. That is the difference between a Pro ClubLine rack and a rack that lives in a garage.
How many kettlebells does it hold?
Three tiers of 62 in. by 13 in. will take a full 12 bell set from 5 lb. to 50 lb. with room left over. Body-Solid publishes tier size rather than a bell count because bell diameters differ by line and by weight.
What makes it a Pro ClubLine rack?
All welded construction, including the feet and the end caps. There are no bolt together joints to loosen, which is what fails first on a rack in a staffed facility. The tiers are deep enough at 13 in. to take large diameter bells that hang off a narrower tray.
What does it fit?
Every Body-Solid kettlebell line. Body-Solid photographs it loaded with the KBV vinyl bells, the KBR powder coated bells and the KBZ premium bells.
Frequently asked questions
Are kettlebells included?
No. The rack ships empty.
How does it ship?
By freight truck, curbside. At 161 lb. it is over the ground carrier limit. Plan to have a second person on hand to move it off the pallet.
Does it need assembly?
Minimal. The frame is welded. Expect to attach the tiers and feet, which is roughly 30 to 45 minutes for two people.
How much floor space does it need?
The rack is 24 in. by 71 in. Add about 3 ft. of standing room in front of it.
Is it rated for commercial use?
Yes. It carries the Body-Solid full commercial warranty with lifetime coverage on the frame and welds.